迫潔靈螺桿清洗劑

PURGECLEAN  迫潔靈是本公司精心研究,專為清除殘留在射出成型機和押出
成型機的料管及螺桿內部的黑點以及成形材料之換色、換料之潔管劑。
 
PURGECLEAN  迫潔靈是多角形的熱可塑性樹酯,透明不吸濕性,不揮發,無毒
性,具有超強發泡性和洗淨力,可大大減少清洗料館及螺桿的時間、人力,提高
機器院轉率,使機器在最短時間內恢復正常生產。
 
PURGECLEAN  迫潔靈在料管是半熔融狀態,在料管內不會產生碳化或附著於料
管之管壁,故可刮除料管及螺桿內不易脫落之樹脂分解物及黑點。
 
使用方法及步驟
1.      將料管內成形樹脂盡可能射出或押出
2.      料管溫度未達250℃者,請調高為250℃
3.      使用於押出機時,請卸下DIE及過濾網
4.      盡量少量地陸陸續續分批投入料筒料斗內
5.      使用中~低驅動壓,若螺桿轉動困難時,請在提升溫度
6.      當射料口有比原材料數倍粗大之樹酯流出則請停留3-5分鐘,使迫潔靈在料管內發揮作用
7.      使用最大射速
8.      使螺桿前後轉動便容易清除射料口附近最不易清除之殘留物
9.      射出或押出料管內之迫潔靈後投入即將生產之材料即完成
 
使用量
【射出機】
60z(100Ts)-400~500g
10z(180Ts)-900~1000g
30z(280Ts)-2.5kg~3.5kg
 
【押出機】
40mm-300~400g
90mm-2.5kg~3.5kg
120mm-4kg
 
因機器製造商及規格眾多,以上用量僅供參考
PURGECLEAN  was developed by our company. it is purging ( screw cleaner) for purge
the residues on the injection m/c and extruder’s cylinder.  
PURGECLEAN   is multi-angle’s particle of thermo plastics, transparent, non
water content,non evaporation ,non toxic ,with strong cleaning ability greatly reduce
the time and material of purging. Enhance machine working time ,so machine will
reproduction in the shortest time.      
PURGECLEAN  in the cylinder is semi-melted, it will not carbonized or stick on the inner.
surface of cylinder. So it is very easily to scrub the decomposed resin and black
particles of the cylinder.  
 
A. PURGING PROCEDURE:
1.      Inject or extrude the cylinder’s rested resin as more as possible.
2.      Please set cylinder temperature at 250℃.
3.      Please disassembly the DIE and filter plate when purge extruder.
4.      With medium-low driving pressure , if screw rotation is difficult ,
        please higher the temperature..
5.      When there is times larger of material flow out from nozzle , stop 3-5 minutes
        that  PURGECLEAN will get best performance.
6.      Use the highest injection speed..
7.      Let screw charge and inject many times..
8.      With next production’s material to inject or extrude the PURGECLEAN
         in cylinder , that complete the process/   
 
B. DOSAGE:
Injection molding machine:             Extruder:
        6oz (100Ts)-400~500g                     40mm-300~400g
        10oz (180Ts)-900~1000g                 90mm-2.5kg~3.5kg
        30oz (280Ts)- 2.5kg~3.5kg              120mm-4kg
 
Because there are too many machine’s specification , so above only for reference.
 
GWEI HONG INTERNATIONAL CO., LTD.
Tel:886-2-22049794
Fax:886-2-22045145
E-mail:gweihong@ms39.hinet.net